Toughened Frosted Folding Glass Shower Partition Frameless Heat -
Shower glass partition for bathroom is made by heating annealed glass to near its softening point,
about 720 degree, and then quickly cooling it by quenching with air
jets. The exterior surface shrinks, freezing it into compression,
while the soft interior of the glass gets pulled out by tensional
forces as it freezes (diagram).
Specification of tempered bathroom partition glass
12mm tempered bathroom partition glass
Edge of tempered glass
Rough Edge,Finish Edge,Polish Edge
Max. size of bent tempered glass
Max. size of flat tempered glass
4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 15mm,19mm, etc.
Clear, Ultra clear;
Euro bronze, golden bronze;
Blue, ocean blue, dark blue, light blue;
F green, light green, dark green;
Euro Grey, dark Grey.
Low-E glass,tempered glass, insulated glass, laminated glass,
reflective glass etc.
Building Curtain Wall, Windows, Doors, Exhibition Hall,
Shower Room And Furniture Glass
1~2 weeks after receiving the deposit
Description of tempered bathroom partition glass
Tempered glass is a kind of pre-stressed glass, to improve the
strength of the glass, typically using a chemical treatment or
physical hardening hardening treatment method, form a pressure in
the glass surface, the glass surface exposed to external stress
when the first offset, thereby improving the carrier ability to
enhance glass itself wind pressure resistance, cold and heat
resistance, impact resistance and so on.
Advantages of tempered bathroom partition glass
1. Security: When the glass is external damage, Debris will become
very small obtuse angle grains and difficult to cause harm to
2. High strength: the impact strength tempered glass of the same
thickness of ordinary glass 3 to 5 times more than the ordinary
glass ,bending strength 3-5 times.
3. Thermal stability: Tempered glass has good thermal stability,
can withstand the temperature is more than 3 times that of ordinary
glass, can withstand 200 °C temperature changes.